Custom Slit to Width x 36 yd. x 4.7 mil Brown Premium PTFE without Liner

CDNT#: T3503S38

Premium, No Liner Fiberglass fabric impregnated with PTFE dispersion and coated with high-temperature, pressure-sensitive silicone adhesive. A very durable and versatile product. Dimensionally stable and resistant to tears, punctures, abrasion, and wear. It will not “cold flow” under heavy load. Performs in continuous temperatures up to 50ºF. 36 yd, 3 mil Premium PTFE.

Custom Sizes Available

For custom sizes, please call 800-643-5996 or Request a Quote.

Request Quote Request A Sample

Working On A Prototype?

Have a sketch or drawing but you're not sure where to go next?
Our professional staff will provide guidance on the best materials and process to turn your idea into a profitable venture.

Request a Prototype

Applications

APPLICATION: Specialty

APPLICATION DESCRIPTION:

Frequently used by the packaging industry as a release surface on heat sealers, blister formation, and form-fill-seal equipment. The durability and anti-stick properties make it an ideal material for the lining of guide rails, chutes and slides. The high temperature capabilities and non-stick properties allow it to perform as an excellent release surface in the composite aircraft industry.

APPLICATION NOTES:

Surfaces to be bonded to should be dry, clean and free from oil and grease.

Request Quote Request A Sample

Technical Data

BRAND: Can-Do Tape

MATERIAL DESCRIPTION:

SIZE:	Custom Slit to Width x 36 yd.
COLOR:	Brown
ADHESIVE TYPE:	Pressure-Sensitive
CONSTRUCTION:	Single Coated
SELF WOUND:	Yes
RELEASE LINER MATERIAL:	N/A

TECHNICAL DATA:

ADHESIVE LAYER:	Silicone
ADHESIVE LAYER DESCRIPTION:	Silicone
BACKING/CARRIER MATERIAL:	Cloth
BACKING/ADHESIVE THICKNESS:	0.0017 in (1.7 mil)
TOTAL THICKNESS:	0.0047 in (4.7 mil)
ADHESION TO STEEL:	45 oz/in
ELONGATION:	less than 5% at break
TEMPERATURE OPERATING:	-100°F to 500°F

DATA SHEET:

Custom Slit to Width x 36 yd. x 4.7 mil Brown Premium PTFE without Liner (PDF)

SHELF LIFE:

Typical shelf life is one (1) year from date of manufacture (DOM).

RECOMMENDED STORAGE CONDITIONS:

Recommended storage conditions: 40-60% Humidity, 60°F to 80°F

NOTES:

Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.

The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.

Request Quote Request A Sample

Warranty

Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.

The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.