Custom Slit to Width x 36 yd. x 2.5 mil Amber Polyimide Film Tape

CDNT#: T750KAPTON

DuPont™ Kapton® Polyimide Film Tape is a polyimide film with silicone adhesive designed for high-temperature masking applications. For the protection of printed circuit board gold finger contacts during wave soldering. Custom slit to width.

For applications where extreme heat and vibration are the norm, designers rely on Kapton® because of its ability to maintain its unique combination of mechanical properties under the harshest of conditions.

Custom Sizes Available

For custom sizes, please call 800-643-5996 or Request a Quote.

Request Quote Request A Sample

Working On A Prototype?

Have a sketch or drawing but you're not sure where to go next?
Our professional staff will provide guidance on the best materials and process to turn your idea into a profitable venture.

Request a Prototype

Applications

APPLICATION: Specialty

APPLICATION DESCRIPTION:

Used in electrical insulation applications meeting class H requirements. Release surface in fabrication of parts cured at elevated temperatures. Thin and conformable enabling masking of uneven surfaces. Wide operating temperatures range up to 500°F. Excellent electrical insulation. Removes cleanly without adhesive residue after exposure to heat/chemical. Excellent resistance to acids, oils, solvents.

APPLICATION NOTES:

Surfaces to be bonded to should be dry, clean and free from oil and grease.

Request Quote Request A Sample

Technical Data

BRAND: Can-Do Tape

MATERIAL DESCRIPTION:

SIZE:	Custom Slit to Width x 36 yd.
COLOR:	Amber
ADHESIVE TYPE:	Pressure-Sensitive
CONSTRUCTION:	Single Coated
SELF WOUND:	Yes
RELEASE LINER MATERIAL:	N/A

TECHNICAL DATA:

ADHESIVE LAYER:	Silicone
ADHESIVE LAYER DESCRIPTION:	Silicone
BACKING/CARRIER MATERIAL:	Polyimide Film
BACKING/ADHESIVE THICKNESS:	1 mil
TOTAL THICKNESS:	2.5 mil
ADHESION TO STEEL:	600 g/inch
TENSILE STRENGTH:	10 kg/inch
ELONGATION:	Greater than 55%
TEMPERATURE OPERATING:	Resistance: 500°F

DATA SHEET:

Custom Slit to Width x 36 yd. x 2.5 mil Amber Polyimide Film Tape (PDF)

SHELF LIFE:

Typical shelf life is one (1) year from date of manufacture (DOM).

RECOMMENDED STORAGE CONDITIONS:

Recommended storage conditions: 40-60% Humidity, 60°F to 80°F

NOTES:

Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.

The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.

Request Quote Request A Sample

Warranty

Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.

The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.