Custom Slit to Width x 60 yd.|360 yd. x 1 mil Clear 400 Acrylic Adhesive Transfer Tape

CDNT#: 70002474156

3M Adhesive Transfer Tape 9457 is a 1.0 mil, 400 high tack acrylic adhesive with 3.2 mil, 55 lb densified kraft paper liner. Adhesive with long term stability, excellent outdoor performance and UV resistance. Master size: 54 inches by 360 yards.

1 mil adhesive transfer tape with long term stability and excellent outdoor performance and UV resistance
High tack, excellent adhesion to most paper stocks. Good low temperature performance and peel strength on many surfaces.
General purpose adhesive transfer tapes for use in printing applications such as splicing, core starting, flexo, and laminating. High speed flying splices on most grades of paper.

Custom Sizes Available

Minimum width is 1/8″ and maximum width is 48″. For custom sizes, please call 800-643-5996 or Request a Quote.

Request Quote Request A Sample

Working On A Prototype?

Have a sketch or drawing but you're not sure where to go next?
Our professional staff will provide guidance on the best materials and process to turn your idea into a profitable venture.

Request a Prototype

Applications

APPLICATION: Transfer

APPLICATION DESCRIPTION:

Ideal for bonding together a wide variety of similar and dissimilar materials such as metals, glass, wood, papers, paints, and many plastics. High speed flying splices and zero speed splices on most grades of paper.

APPLICATION NOTES:

Application Techniques: Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improve bond strength. To obtain optimum adhesion, the bonding surfaces must be clean, dry, and well unified. Some typical surface cleaning solvents are isopropyl alcohol or heptane.* *Be sure to follow manufacturer™s safety precautions and directions for use when using solvents. Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.

Request Quote Request A Sample

Technical Data

BRAND: 3M

MATERIAL DESCRIPTION:

SIZE:	Custom Slit to Width x 60 yd.\|360 yd.
COLOR:	Clear
ADHESIVE TYPE:	Pressure-Sensitive
CONSTRUCTION:	Single Coated
RELEASE LINER MATERIAL:	55# Densifed Kraft

TECHNICAL DATA:

ADHESIVE LAYER:	Acrylic
ADHESIVE LAYER DESCRIPTION:	400 medium firm acrylic
BACKING/CARRIER MATERIAL:	None
THICKNESS:	1 mil (0.025 mm)
ADHESION TO STEEL:	25 oz./in. width (27 N/100 mm)

DATA SHEET:

Custom Slit to Width x 60 yd.|360 yd. x 1 mil Clear 400 Acrylic Adhesive Transfer Tape (PDF)

NOTES:

Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.

The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.

Request Quote Request A Sample

Warranty

Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.

The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.