1/2″ x 60 yd. x 4.6 mil Red Masking Tape

CDNT#: 237R12

Red Specialty Paper Masking Tape. A conformable/flexible crepe paper coated with a pressure-sensitive natural/synthetic rubber adhesive for versatile performance. For use as a general-purpose tape, where the need for colors for coding or identification is desired. Identification and coding, bag sealing/closure (produce, small candy bags, poultry, etc.), coupon bookbinding. Available in coated colors. Product is not printable.

Custom Sizes Available

For custom sizes, please call 800-643-5996 or Request a Quote.

Request Quote Request A Sample

Working On A Prototype?

Have a sketch or drawing but you're not sure where to go next?
Our professional staff will provide guidance on the best materials and process to turn your idea into a profitable venture.

Request a Prototype

Applications

APPLICATION: Fastening

APPLICATION: Maintenance

APPLICATION: Packaging

APPLICATION DESCRIPTION:

For use on a variety of substrates as a general purpose tape for labeling, color coding, decorating, identification, packaging, bundling, binding, holding, and banding. Silicone-free tape. Tested according to LHAMA procedures. Applicable standards defined by ASTM D6123/D6123M-07 Type. Meets Consumer Product Safety Commission requirements through conformance with ASTM D-4236

APPLICATION NOTES:

Surfaces to be bonded to should be dry, clean and free from oil and grease.

Request Quote Request A Sample

Technical Data

BRAND: Can-Do Tape

MATERIAL DESCRIPTION:

SIZE:	1/2" x 60 yd.
COLOR:	Red
ADHESIVE TYPE:	Pressure-Sensitive
CONSTRUCTION:	Single Coated
SELF WOUND:	Yes
RELEASE LINER MATERIAL:	N/A
RELEASE LINER THICKNESS:	N/A

TECHNICAL DATA:

ADHESIVE LAYER:	Rubber
ADHESIVE LAYER DESCRIPTION:	Thermoplastic Rubber
BACKING/CARRIER MATERIAL:	Crepe paper
BACKING/ADHESIVE THICKNESS:	N/A
TOTAL THICKNESS:	4.6 mil
ADHESION TO STEEL:	32 oz/in width (3.50 N/10mm)
TENSILE STRENGTH:	18 lbs/in width (31.5 N/10mm)
ELONGATION:	7%
TEMPERATURE APPLICATION:	60°F to 150°F (service temp range)

DATA SHEET:

1/2″ x 60 yd. x 4.6 mil Red Masking Tape (PDF)

SHELF LIFE:

Typical shelf life is one (1) year from date of manufacture (DOM).

RECOMMENDED STORAGE CONDITIONS:

Recommended storage conditions: 40-60% Humidity, 60°F to 80°F

NOTES:

Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.

The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.

Request Quote Request A Sample

Warranty

Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.

The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.