48″ x 360 yd. x 9.3 mil Clear UV Light Ultra-High Temperature Transfer Tape

3M UV Light Ultra High Temp Transfer Tape 9085UV is a 5.0 mil 100HT ultra high temperature acrylic adhesive with a brown kraft paper liner. Constructed with UV dye for optimal visual inspection under black light. 3M Ultra High Temperature 100HT Adhesive Transfer Tapes 9082 and 9085 utilize a high performance and low outgassing adhesive system having excellent heat resistance in high temperature environments. Not only does it have excellent holding power, but also its adhesion strength is significantly higher than typical pressure sensitive tapes.

Excellent heat resistance in high temperature environments.
For applications that require both higher processing and operating temperatures.
Thicker version of 3M Adhesive Transfer Tape 9083
UV fluoresce agent to allow black light inspection during converting and assembly.

Custom Sizes Available

For custom sizes, please call 800-643-5996 or Request a Quote.

Request Quote Request A Sample

Working On A Prototype?

Have a sketch or drawing but you're not sure where to go next?
Our professional staff will provide guidance on the best materials and process to turn your idea into a profitable venture.

Request a Prototype

Applications

INDUSTRY: Converter Solutions, Transportation, Specialty Vehicle, Oil and Gas, Military & Government, General Industrial, Electronics, Aerospace

INDUSTRIES: Aerospace

INDUSTRIES: Defense

INDUSTRIES: Electronics

INDUSTRIES: Industrial

APPLICATION: Transfer

APPLICATION DESCRIPTION:

Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improve bond strength. To obtain optimum adhesion, the bonding surfaces must be clean, dry, and well unified. Some typical surface cleaning solvents are isopropyl alcohol/water mixture or heptane.* Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory. *Note: Be sure to follow the manufacturer™s precautions and directions for use when using solvents.

Request Quote Request A Sample

Technical Data

BRAND: 3M

MATERIAL DESCRIPTION:

SIZE:	48" x 360 yd.
COLOR:	Clear
ADHESIVE TYPE:	Pressure-Sensitive
CONSTRUCTION:	Transfer
LINER:	Tan 58# Polycoated Kraft Paper (PCK)

TECHNICAL DATA:

ADHESIVE LAYER:	Acrylic
ADHESIVE LAYER DESCRIPTION:	3M 100HT Ultra High Temperature Acrylic Adhesive
BACKING/CARRIER MATERIAL:	Kraft
THICKNESS:	5 mil Face-Side Adhesive Thickness
TOTAL THICKNESS:	9.2 mil

DATA SHEET:

48″ x 360 yd. x 9.3 mil Clear UV Light Ultra-High Temperature Transfer Tape (PDF)

SHELF LIFE:

Store at room temperature conditions of 70°F (21°C) and 50% relative humidity. If stored under proper conditions, product retains its performance and properties for 24 months from date of manufacture.

NOTES:

Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.

The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.

Request Quote Request A Sample

Warranty

Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.

The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.