- Overview
- Applications
- Technical Data
- Warranty
48″ x 175 yd. x 31 mil Black Double-Sided Acrylic Adhesive Polyethylene Foam Tape
Double-Sided Polyethylene Foam Tape. Pressure-sensitive foam mounting tape with a highly aggressive synthetic acrylic adhesive. 72 yard roll of D/C White PE Foam.
3M 4492 Features:
- Black or white, 0.031 in. (0.8 mm) closed-cell polyethylene foam carrier
- Offers an ultimate adhesion to a large variety of surfaces
- Bonds to irregular surfaces due to it’s high conformability
- Long term acrylic durability
Custom Sizes Available
For custom sizes, please call 800-643-5996 or Request a Quote.
Request Quote Request A Sample
Working On A Prototype?
Have a sketch or drawing but you're not sure where to go next?
Our professional staff will provide guidance on the best materials and process to turn your idea into a profitable venture.
Applications
APPLICATION DESCRIPTION:Instead of mechanical fasteners such as screws, bolts and studs, 3M 4492 double coated polyethylene tape leaves no puncture holes. 3M 4492 double coated tape offers speed, strength and improved aesthetics to your mounting application. 4492 can be easily applied by hand or with a dispenser, with no special application equipment required. Immediate holding strength. Further improved upon the power of liquid adhesives.
APPLICATION NOTES:
Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improve bond strength. To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Typical surface cleaning solvents are isopropyl alcohol and water (rubbing alcohol) or water. Note: Be sure to follow the manufacturer™s precautions and directions for use when using cleaning solvents. Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.Technical Data
BRAND: 3MMATERIAL DESCRIPTION:
| SIZE: | 48" x 175 yd. |
| COLOR: | Black |
| ADHESIVE TYPE: | Pressure-Sensitive |
| CONSTRUCTION: | Double Sided |
| RELEASE LINER MATERIAL: | 3 mil (0.08 mm) Tan Paper |
| RELEASE LINER THICKNESS: | 3 mil (0.08 mm) |
TECHNICAL DATA:
| ADHESIVE LAYER: | Acrylic |
| ADHESIVE LAYER DESCRIPTION: | Acrylic |
| BACKING/CARRIER MATERIAL: | Polypropylene Film |
| BACKING/ADHESIVE THICKNESS: | N/A |
| ADHESION TO STEEL: | 8 lb/inch width (140 N/100mm) |
| TENSILE STRENGTH: | 60 lb./in.2 (415 kPa) |
| ELONGATION: | N/A |
DATA SHEET:
48″ x 175 yd. x 31 mil Black Double-Sided Acrylic Adhesive Polyethylene Foam Tape (PDF)
SHELF LIFE:
Typical shelf life is one (1) year from date of manufacture (DOM).NOTES:
Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.
The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.
Warranty
Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.
The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.
