3/8″ x 36 yd. x 62.5 mil Beige Double-Coated Urethane Foam Tape

3M Double-Coated Urethane Foam Tape 4016 is a thick, double-coated open-cell urethane foam tape with a 62 lb. densified kraft paper liner and is ideal for applications such as mounting interior signage and nameplates. Its 62 mil foam provides handling convenience and cushioning. 3M Double-Coated Urethane Foam Tapes are a family of tapes that are conformable foams offering high shear strength and are available with either a high temperature holding acrylic adhesive system or a rubber adhesive system for bonding to various types of surfaces for mounting, joining and holding.

High shear strength on metal and high surface energy plastics
Durable foam is ideal for interior mounting applications
Off-white color provides a clean appearance
Ideal for bonding, attaching and mounting
Thick foam dampens and prevents vibration and open-cell structure aids component cooling

Custom Sizes Available

For custom sizes, please call 800-643-5996 or Request a Quote.

Request Quote Request A Sample

Working On A Prototype?

Have a sketch or drawing but you're not sure where to go next?
Our professional staff will provide guidance on the best materials and process to turn your idea into a profitable venture.

Request a Prototype

3M 4016 Double Coated Urethane Foam Tape

Applications

INDUSTRIES: Industrial

APPLICATION: Bonding

APPLICATION DESCRIPTION:

Bonds surfaces and provides handling convenience and cushioning. The urethane foam tapes are generally ideal for interior applications or for exteriorapplications where the tape will be protected from the environment. The urethane foam is open cell.

APPLICATION NOTES:

Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact andimprove bond strength. To obtain optimum adhesion, the bonding surfaces must be clean, dry and wellunified. Typical surface cleaning solvents are isopropyl alcohol* and water (rubbing alcohol) or heptane.Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommendedbecause the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.*Note: Be sure to follow the manufacturer™s precautions and directions for use whenusing solvents.

Request Quote Request A Sample

Technical Data

BRAND: 3M

MATERIAL DESCRIPTION:

SIZE:	3/8" x 36 yd.
COLOR:	Beige
ADHESIVE TYPE:	Pressure-Sensitive
CONSTRUCTION:	Single Coated
LINER:	Green Plaid
RELEASE LINER MATERIAL:	3 mil (0.08 mm)

TECHNICAL DATA:

ADHESIVE LAYER:	Acrylic
ADHESIVE LAYER DESCRIPTION:	3M 100 Acrylic
BACKING/CARRIER MATERIAL:	Foam
THICKNESS:	62.5 mil (1.6 mm) nominal
TENSILE STRENGTH:	140 (965) psi (kPa)
ELONGATION:	100%

DATA SHEET:

3/8″ x 36 yd. x 62.5 mil Beige Double-Coated Urethane Foam Tape (PDF)

SHELF LIFE:

To obtain best performance, use these products within 24 months from date ofmanufacture except 3M„¢ Double Coated Urethane Foam Tape 4085 which is18 months from date of manufacture. Store in original cartons at 70°F (21°C) and 50% relative humidity.

NOTES:

Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.

The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.

Request Quote Request A Sample

Warranty

Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.

The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.