3M VHB Adhesive Tapes

1/2″ x 60 yd.|180 yd. x 6.2 mil Clear 3M VHB Adhesive Transfer Tape

3M™ VHB Adhesive Transfer Tape F9460PC is a 2.0 mil 100MP adhesive with 4.2 mil 58 lb polycoated kraft paper liner. 3M High Performance Acrylic Adhesive 100MP, which has excellent long term holding power with much higher adhesion strength than typical pressure sensitive adhesive systems. These 3MTM VHBTM Adhesive Transfer Tapes are transparent and are ideal for use in many interior and exterior industrial applications to replace rivets, spot welds, liquid adhesives, and other permanent fasteners.

2.0 mil high performance industrial joining and metal fabrication
Excellent long-term holding power with higher adhesion strength than typical PSAs
Transparent and ideal for use in many interior and exterior industrial applications to replace rivets, spot welds, liquid adhesives and other permanent fasteners

Custom Sizes Available

For custom sizes, please call 800-643-5996 or Request a Quote.

Request Quote Request A Sample

Working On A Prototype?

Have a sketch or drawing but you're not sure where to go next?
Our professional staff will provide guidance on the best materials and process to turn your idea into a profitable venture.

Request a Prototype

3M Transfer Tape with 100Mp VHB Adhesive

Applications

INDUSTRY: Converter Solutions, Automotive, Construction, Oil and Gas, Signage, Transportation, Specialty Vehicle, Metalworking, Medical, General Industrial, Military & Government, Appliance, MRO, Electronics, Aerospace, Woodworking

INDUSTRIES: Aerospace

INDUSTRIES: Appliance and Housing

INDUSTRIES: Automotive

INDUSTRIES: Construction

INDUSTRIES: Defense

INDUSTRIES: Electronics

INDUSTRIES: Industrial

INDUSTRIES: Medical

INDUSTRIES: Transportation

APPLICATION: Transfer

APPLICATION DESCRIPTION:

Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improve bond strength. To obtain optimum adhesion, the bonding surfaces must be clean, dry, and well unified. Some typical surface cleaning solvents are isopropyl alcohol/water mixture or heptane.* Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory. *Note: Be sure to follow the manufacturer™s precautions and directions for use when using solvents.

APPLICATION NOTES:

3M Adhesive 100MP is thermoplastic in nature, becoming softer as temperature increases and firmer as temperature decreases. As the Figure 1. T-Peel Performance vs. Temperature (3MTM VHBTM Adhesive Transfer Tape F9473PC on Aluminum) 100 90 Break Away Peel adhesive becomes firmer, the performance generally increases.

Request Quote Request A Sample

Technical Data

BRAND: 3M

MATERIAL DESCRIPTION:

SIZE:	1/2" x 60 yd.\|180 yd.
COLOR:	Clear
ADHESIVE TYPE:	Pressure-Sensitive
CONSTRUCTION:	Transfer
LINER:	Tan 58# Polycoated Kraft Paper (PCK)

TECHNICAL DATA:

ADHESIVE LAYER:	Acrylic
ADHESIVE LAYER DESCRIPTION:	3M 100MP High Temperature Acrylic Adhesive (VHB)
BACKING/CARRIER MATERIAL:	Kraft
THICKNESS:	2.3 mil Face-Side Adhesive Thickness
TOTAL THICKNESS:	6.2 mil

DATA SHEET:

1/2″ x 60 yd.|180 yd. x 6.2 mil Clear 3M VHB Adhesive Transfer Tape (PDF)

SHELF LIFE:

Store at room temperature conditions of 70°F (21°C) and 50% relative humidity. If stored properly, product retains its performance and properties for 18 months from date of shipment. If the products have been exposed to severe weather conditions, we suggest to precondition the products at the above storage conditions for at least 24 hours before using them.

NOTES:

Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.

The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.

Request Quote Request A Sample

Warranty

Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.

The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.